Description
ACFS07-Series System is the newest fermentor that offers an all-in-one fermentation solution and ultimate automation experience to ensure easy, smooth and productive bio-processing. The controller is pre-configured to support both thermostat and dry heating; together with its full compatibility to vessels from 0.5 to 20L, it provides a broad coverage to cultivation of most cell lines.
ACFS07-Series System is equipped with the latest control software; this user-friendly, intuitive software incorporates with many advanced functions to boost your experiment efficiency and thus lead to the success. Besides the manual controls of agitation, temperature, pH, DO level and feeding, one can also execute 15-step scheduled sequence controls on above parameters as well as pH and DO feedback controls. Moreover, a broad selection of plug-and-play optional devices are available to meet your specific requirement.
PC software connects up to 16 systems 16 vessels at the same time.
ACF07-Series is a next generation Fermentation system with dual modes of heating to allow connection of any type of vessel.
ACFS07-Series contains greatly enhanced functionalities and capabilities including excellent versatility and system expansion capabilities.
Duo heating system, thermostat and dry heating combined in one
Universal system for R&D in cell culture and microbiology
Interchangeable five (5) types of autoclavable glass vessel
Control up to sixteen (16) systems from a single interface
Compatible with microbial and cell culture applications
Intuitive and user-friendly control software in multi-language
Small pilot scale 15L and 20L glass vessel compatible
Ethernet communication with SCADA software, and IP addressing
EZScript software for advanced fermentation process (optional)
Multi-language operation interface is available
| Vessel | Double Jacketed (FS-V-A series) | Single Wall (FS-V-B series) | Air Lifter (FS-V-C series) | |||||||
| Working volume | 500ml | 1L | 3 L | 5 L | 10 L | 1L | 3 L | 5 L | 10 L | 5 L |
| Total volume | 1L | 1.5L | 3.8 L | 6.8 L | 12.5 L | 1.5 L | 3.8 L | 6.8 L | 12.5 L | 7 L |
| Vessel | Single Wall with Heating Blanket (FS-V-B series) | Single Wall with Heating Base Unit (FS-V-D series) | |||||||
| Working volume | 1L | 3 L | 5 L | 10 L | 15L | 20L | 3 L | 5 L | 10 L |
| Total volume | 1.5L | 3.8 L | 6.8 L | 12.5 L | 18L | 24.4L | 3.7 L | 6.4 L | 13.4L |
| Power source | 100-120V / 210-230V, 50-60Hz with electrical safety cutoff switch |
| Water source | 10 psig (0.69 barg), 14.5 psig (1 barg) maximum; (water supplied to fermenter must be softed and at least 15°C below set operating temperature) |
| Air source | 10 psig (0.69 barg), 29.0 psig (2 barg) maximum; air must be dry, oil-free and filtered |
| Sterilization | Autoclave; size of the autoclave inner chamber must be able to accomodate vessel with condenser attached |
System Specification:
| Controller |
Duo heating system controller |
||||
|
Built-in rotameter |
|||||
|
4 x built-in pump heads |
|||||
| Vessel |
Double jacketed vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors) |
Single wall dish bottom vessel (includes glass body, head plate, T-handling bar, 2 probe adaptors) |
Airlifter vessel (includes glass body, head plate, draft tube, T-handling bar, 2 probe adaptors) |
Single wall dish bottom with heating blanket (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating blanket) |
Single wall plain bottom with heating base unit (includes glass body, head plate, T-handling bar, 2 probe adaptors and heating base unit) |
|
2 adjustable Pitched-blade impeller |
3 adjustable Rushton-type impellers |
no impellers |
3 adjustable Rushton-type impellers |
3 adjustable Rushton-type impellers |
|
|
Baffle assembled |
Draft tube assembled |
Baffle assembled |
|||
| Condenser assembled | |||||
|
Air sparger assembled |
Micro sparger assembled |
Air sparger assembled |
|||
| Motor |
Agitation motor |
N / A |
Agitation motor |
||
| Probes |
1x pH probe and 1x pH cable |
||||
|
1x Do probe and 1x DO cable |
|||||
|
1x Temperature probe and 1x Temperature cable |
|||||
|
1x anti-foam/level sensor and 1x anti-foam/level sensor cable |
|||||
| Start-up Kit |
Complete start-up kit includes, silicone tubes, tube clamps, metal connector and autoclavable disc filters |
||||
