UPW-QM Series

Description

Feed of ultrapure water system
Glassware washing
Microbiological analysis
Sample diution and reagent preparation
Chemical and qualitative analysis
Water analysis and universal HPLC
Spectrum measurement
Water for production technology
Feed of autoclave sterilizer ,biochemical analyzer , immunoassay analyzer , constant temperature and humidity chamber , salt spray test chamber, dampening machine and etc.

UPW-125QM	UPW-94QM	UPW-63QM	UPW-45QM	Model
Tap water: TDS<200 ppm, 5-45°C, 1.0-4.0Kgf/cm2 (Extra pretreatment filter is recommended, if TDS>200ppm)				Feed water requirements*
PF+AC+RO+AC+DI+TF				Flow procedure
Deionized water quality
>10-18.2MΩ.cm				Resistivity
0.055-0.1µs/cm				Conductivity
<0.1cfu/ml				Bacteria
				RO water quality
96%-99% (New RO membrane)				Ion rejection rate
>99%, when MW>200 Dalton				Organic rejection rate
99%				Particles and bacteria rejection rate
125 liters/hour	94 liters/hour	63 liters/hour	45 liters/hour	Output(25°C)
2: RO water, deionized water				Pure water outlet
Length×Width×Height:640×540×1110mm/ Weight: about 70Kg				Dimension/Weight
AC110-220V, 50/60Hz, 240W		AC110-220V, 50/60Hz, 120W		Electric requirements
Main body (Including 1 set of cartridges)+ 2 built-in15 liters tank+ TDS pen(QE) +accessory bag				Standard configuration

The feed water quality will influence the pure water´s quality and cartridges´ life-span.
PF: polypropylene spun fiber, AC :active carbon, RO :reverse osmosis, DI:ion exchange, TF:terminal microfiltration..
All the specifications are tested under the situation: feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.