UPW-QM Series

QUICK OVERVIEW

Product Code:1371
Brand: Water Purification

UPW-QM Series


Share this product on social networks

 

  • Feed of ultrapure water system
  • Glassware washing
  • Microbiological analysis
  • Sample diution and reagent preparation
  • Chemical and qualitative analysis
  • Water analysis and universal HPLC
  • Spectrum measurement
  • Water for production technology
  • Feed of autoclave sterilizer ,biochemical analyzer , immunoassay analyzer ,  constant temperature and humidity chamber , salt spray test chamber,  dampening machine and etc.

Technical Specification

 

UPW-125QM

UPW-94QM

UPW-63QM

UPW-45QM

Model

Tap water: TDS<200 ppm, 5-45°C, 1.0-4.0Kgf/cm2

(Extra pretreatment filter is recommended, if TDS>200ppm)

Feed water requirements*

PF+AC+RO+AC+DI+TF

Flow procedure

Deionized water quality

>10-18.2MΩ.cm

Resistivity

0.055-0.1µs/cm

Conductivity

<0.1cfu/ml

Bacteria

RO water quality

96%-99% (New RO membrane)

Ion rejection rate

>99%, when MW>200 Dalton

Organic rejection rate

99%

Particles and bacteria rejection rate

125 liters/hour

94 liters/hour

63 liters/hour

45 liters/hour

Output(25°C)

2: RO water, deionized water

Pure water outlet

Length×Width×Height:640×540×1110mm/ Weight: about 70Kg

Dimension/Weight

AC110-220V, 50/60Hz, 240W

AC110-220V, 50/60Hz, 120W

Electric requirements

Main body (Including 1 set of cartridges)+ 2 built-in15 liters tank+ TDS pen(QE) +accessory bag

Standard configuration

  • The feed water quality will influence the pure water´s quality and cartridges´ life-span.
  • PF: polypropylene spun fiber, AC :active carbon, RO :reverse osmosis,  DI:ion exchange, TF:terminal microfiltration..
  • All the specifications are tested under the situation: feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.