Introduction :
- The machine consists of a load frame and motorized pumping unit. The lower platen
- has two rollers, the distance between which is adjustable.
- The upper platen has also roller. Micro-processor based Digital Load Indicator
- to indicate applied load is fitted in the Pumping unit. The Pumping unit is separate
- electrically operated, housed in a cabinet. On/Off switch and a slow/fast lever
- to control rate of loading are fitted on the front panel of the pumping unit.
- A micro switch and relay fitted inside the Digital Load indicator to protect
- the unit from over loading.
•Max. Tile size 660 X 660mm
•Direct reading of total applied load in KN
•Direct reading of Flexural strength in N/mm2 – No calculation required
•Peak hold facility
•RS 232 interface (Optional – at extra cost)
•Direct analytical reports on computer (Optional)
•Auto generation of load/time graph. (Optional)
•Overload safety cut out
•Password protected Calibration to prevent Un authorized manipulation
Type of Pumping : Electrical
•Loading Range : 100 KN
•Least Count : 0.1 KN
•Optional Accessories at extra cost : 1) PC link software
• 2) Wireless PC link software