CTD-3003L

QUICK OVERVIEW

Product Code:912
Brand:Densimeter

CTD-3003L


Share this product on social networks

Direct reading data, Shorter measuring time, Density resolution 0.001 g/cm3

Chemical Solution, Modern Energy, Oil Fuel, Fine Chemical Engineering, Chemical

Reagent, Chemistry Researching Laboratory.

Standards:

In accordance with Archimedes principle, GB/T 611 、GB/T11540、GB/T12206、GB/T5518standards etc.

Combine Archimedes principle with modern electronics technique of CTD-3003L; Digital display liquid

dosimeter; The data can be read directly with high measuring accuracy;

The operation is more easy and getaway from the influence of external factor and temperature compared with

traditional wechsler

Balance method and pycnometer method; It can be applied to the field of quality management, cost control, formula researching and so on. Also,the solvent,adhesive,paint,

pitch,resin,chemical oils, edible oil,food additives,drink,dairy products can be measured.

Specification:

  • Density resolution: 0.001 g/cm3
  • Maximum weigh:300g
  • Minimum weigh:0.005g
  • Measuring range: 0.001—99.999g/cm3

Density value can be showed by one procedure. and repeatedly continuous rapid measuring  can be worked.

Digital Display; High accuracy of measuring; Simple operation; Stable and  Durable. Density value of samples with the temperature from normal to 100℃

can be measured. Take samples conveniently. and 50CC would be okay.

There is no cumbersome debugging and operation compared with traditional  Wechsler balance method

And pycnometer method.

It is very easy to clean measuring cup, and can’t got the limitation of the size of pycnometer caliber.

Coordinate with the operation of thermostatic tank to measure the proportion with the  Required temperature.

Adopt the uncase dedicated wind and dust cover, which makes the combination convenient and durable.

Volatile liquid,corrosivity liquid, vicious liquid, strong acid and strong lye liquid can be measured quickly. Interface of RS-232C is included. The printer of DE-40 will be available to connect PC with printer.

Measuring Procedure:

Place beaker with sample on testing board. And take off weight of pothook.

Make standard weight hanged on pothook and submerged in liquid to be tested

totally. and then Press ENTER button to memory. Density value can be displayed.

Standard Accessories:

Host, measuring frame,DE-20A standard liquid measuring assembly ,tweezers,

thermometer,100G weight, wind and dust cover ,measuring  support ,power  transformer

DE-20A standard liquid measuring assembly:

Two stainless steel pothooks, one normal glass weight, one normal stainless steel weight, two beakers.

Optional Accessories:

DE-40 printer,DE-20B anti corrosive liquid measuring assembly.

 

TECHNICAL SPECIFICATION

Name/model

CTD-3003L   Electronical Liquid Densimeter

Density resolution

0.001 g/cm3

Density range

0.001—99.999g/cm3

 

Measuring type

a:mobility liquid,viscous liquid,volatile liquid,corrosivity liquid, high temperature liquid,suspension liquid,emulsion and so onb:alcohol,scaling powder,essence,blood,sodium

chloride, glycerol, electrolyte,diesel,refrigerating, hydrofluoric acid,dichloromethane,vitriol

Measuring Principle

Archimedes principle displacement method

Measuring mode

1 group

Measuring time

About 5 seconds

Memory mode

memory in shorter time by one procedure

Result Display

Density value

Specific Gravity

Measuring frame

stainless steel specific gravity measuring frame

Function ofsetting

Temperature setting,solution density setting, measuring weights setting of weight in the normal liquid and water

Calibration mode

auto correction with one button,auto detection.

Measuring testing

distilled testing

Output mode

standard interface of RS-232,output and print testing data conveniently

 

Standard accessories

Host,measuring frame,

DE20A standard liquid measuring assembly,tweezer,thmometer,100G

weight,wind and dust cover,measuring support,power transformer

DE-20A standard liquid measuring assembly:

Two stainless steel pothooks,one normal glass weight,one normal stainless steel

weight,two beakers.

Optional accessories

DE-40 printer,DE-20B anti corrosive liquid measuring assembly

power

AC~220V / 50HZ

 Main feature data display,accuracy,rapid,convenience durable,economy

Reviews

There are no reviews yet.

Be the first to review “CTD-3003L”